Forklift Work Platforms

forklift work platforms

Standard frame - with removable
rails for easy transportation.

work platform
man baskets

newWork Platform w/ Center Gate



man baskets

newUtility Frame - fixed non-folding rails for access to 3 sides of poles.



Forklift Work Platforms Sizes & Part Numbers

Available with Direct Mount Hitch Plates to fit your coupler
(No forks or frame required)

Forklift Work Platform Features:

  • UNIVERSAL FIT - Fork pockets accept 2 3/4" thick, 6" wide forks. Fork pockets spaced 48" except on WP48. Special order different fork pocket spacing. Transportation fork pockets are standard equipment. Steel pins secure frame behind heel of forks.
  • GUARDRAIL - Heavy duty 1 1/4" square tubing that exceeds the 200 lb. capacity requirement. Top rail is located at 42" height. Toe board is 4" high with 50 lb. capacity rating Removable guard rails for ease of transportation. Lanyard anchor points standard (#vary with length of unit). Optional D rings available.
  • Utility Platform - has 18" x 22" special floor cut-out for complete access to 3 sides of poles.
  • GATES - Dual locking access gates with safety stops. Gates swing in for safety and are located at each end.
  • FLOOR - Heavy duty expanded metal for longer life and durability.
  • OPTIONAL EQUIPMENT - Mast protection screens must be ordered when used on trucks with vertical mast or backstop area poses a safety hazard. Standard size is 42" wide and 72" tall.
  • The "Short 10TM" is the widest work platform to meet OSHA & ANSI requirements for standard equipment.
  • 1,000 POUND CAPACITY - Platform rating only! Check your forklift for its capacity.

Work Platform Applications

  • Telescopic Material Handlers
  • Rough Terrain Forklifts
  • Warehousing & In-plant Forklifts

IMPORTANT NOTE: You must add body belt anchorage to cover your application.

Stock Sizes
Model # Size
WP48-48 48" X 48"
WP48-96 48" X 96"
WP48-116 "Short 10TM" 48" X 116"
WP48-192 48" X 192"

ASME/ANSI standard for elevating personnel B56.8.25.1 reads: floor dimensions which shall not exceed two times the load center distance listed on the rough terrain forklift truck nameplate, measured parallel to the longitudinal center plane of the truck [measured across the load bearing tires plus 10 in. (250 mm) on either side.

Most Rough Terrain Forklifts & Material Handlers are 96" wide,
plus the 20" allowed past the load bearing tires equal the 116" width of the "Short 10TM"

 

Our Work Platforms fit the following equipment:

Allis Chalmers | Bobcat | Case | Caterpillar | Clark | Gehl
Gradall | Hyster | JCB | JLG | John Deere | Komatsu | Lull
Mitsubishi | New Holland | Nissan | Skytrak | Terex | Toyota | Volvo | Yale


Last Modified: Friday, 14-Sep-2007 16:35:26 CDT